Posts Tagged Beadboard
“All that for a broom closet?”
“Wouldn’t it have been easier just to build and stain a new door?”
Well, maybe. I’d like to think it would’ve been the same amount of work. But a new door would have been “fake.” It wouldn’t have the gauge near the top hinge, where perhaps the guy who installed the door slipped with his screwdriver. Or the chip on the middle raised panel, from when a little kid running to play outside hit the door with the toy in his hand. And I’d have to have found a couple special boards with wormholes dotting one side, like on the inside of the door frame. Gauged, chipped, and wormholes? Yes. Flat, smooth, perfect; no. Once again, it’s something I like to call “character.”
A quick visit to my local friendly Ace Hardware and I found specialty screws that were a perfect fit & color match for the original hinges, and the door was “swinging again” (It’s like when they say the title of the movie in the movie!) in just 5 minutes.
Unfortunately the cabinet door latch was busted – didn’t have a knob at all, and from all the paint it didn’t have it’s spring action either. (In fact, to open this cabinet, someone had folded over a piece of duct tape & stapled it to the edge of the door to make a pull tab. That’s one solution.) So I’ll keep looking through rummage piles until I find a door latch the same style. For now, the door wants to naturally stay open about 1/2 an inch, so I can use it without a knob.
Lastly, I didn’t like how the back wall of the cabinet looked. The paint is chipping, and whatever is under the paint doesn’t even look or feel like wood- it’s almost flexible like thin hard-board paneling. So I bought a sheet of plywood beadboard panel and ripped it down to the exact width to fit inside. Once it was stained & poly’d, it looks like it has always been there. Yes, I lost 3/8 inch in cabinet depth, but there is still plenty of room for a broom, dustpan, and even a small mop handle. On my next run to the hardware store I’ll pick up a couple broom handle clips, a small hook to hold the dustpan, and I’ll be in business.