Posts Tagged Roofing

More Done, More to Do

Although work and life has been busy over the last few weeks, (including a friend’s wonderful wedding weekend and a crazy Halloween party), I’m still getting work done on the humble bungalow. Slowly but surely.

Although I had finished the roof on the house the weekend before (rain and all), I still had the garage to tear-off and re-roof. Just a 1 car garage so I kept saying how I’d like to get it all done in one weekend. And we basically did.


Turns out there were 3 full layers of asphalt on the garage – but no shake shingles underneath. So although the extra layer of shingles took more time to tear-off, I saved time not needing to lay down new decking across the roof. It was tear-off and then immediately rolling out the felt paper. Although one afternoon did get rainy, we were able to spend all day Sunday getting it finished – literally working until dark and bringing out the work light for the last few rows.


But we got it all finished – I know its just a roof, but damn I’m proud of it! The difference of before and after makes the entire house look different!

Going back inside, I had left the bathroom without the finishing touches in order to get the roof replaced this fall. Although I had a working toilet, the kitchen sink was the only running faucet inside the house. I had begun the process of refinishing an old dresser to transform it into the bathroom vanity, but it sat unfinished for a few months.

P1030885 B

I bought it from a Craigslist seller earlier this summer and envisioned it as a sink base. 1 drawer was already entirely busted, and even with my experience repairing broken furniture it was too far gone. So I didn’t feel bad cutting into the dresser top and altering the remaining drawers to make room for the sink drain and supply lines. I also stained the cabinet a bit darker for a richer contrast between the wooden vanity and all white bathroom tile. 4 layers of marine varnish later, and the cabinet was ready for the sink bowl.


I attached the faucet to the sink before placing the bowl into the cabinet – much easier to do that step when the sink is on the floor and you don’t have to lay on your back on the floor. When it came time to glue the sink bowl in place, I knew I didn’t want to move the sink around and smear silicone all over the dresser top. So I first dry-fit the sink, measuring from left to right, making sure the sink was centered. Once in place, I used masking tape to outline the perimeter of the sink. This way I knew exactly how to center the sink and this also gave me an extremely clean line for the silicone that squeezed out. The result speaks for itself – and is exactly the look I had in my mind.


Such clean silicone lines! And that wood counter is shine-y! Looks like glass, but it should hold up to water from the bathroom sink just fine for years to come.


I have the top drawers installed in this photo.  They each had to be altered to make way for the curve of the sink bowl and additional space for the drain and supply pipes. In reality, the top drawers are only about half as wide as they were originally, but this way they still function and provide some storage. Enough room for all the typical top drawer bathroom items; toothpaste, toothbrush, razors, bar soap, and everything else that always finds its way here.

The middle drawer isn’t in the photo yet, I have one more coat of poly to brush onto that drawer front. For the bottom drawer opening, I’m thinking about a few slats across the bottom to hold a few baskets – stuff them with rolled up towels or something.

, , , , , , , , ,


Wrapping up the Roof

So it took almost 3 weekends and a few work days in between, but this past Sunday we did it! My friends and I finished laying shingles on the east side of the roof not too long after lunch, and later in the afternoon we unrolled the ridge vent and nailed down the ridge pieces. By 5:15, it was official: the roof on the house was finished!


Above is standing on the roof of the garage, looking south.  The home across the street is really similar in size and scale to my bungalow, so many of the homes in this block are almost duplicates to the ones beside or across the street.

Notice how flat the shingles look? I was so thrilled to finally get to this point! It got a high of 65 the last day we worked, and the shingles were gluing themselves down as fast as we could nail them. The scaffold was really helpful on this project, it made getting on and off the roof faster, gave us a nice platform to stand on, and helped with getting the new shingles onto the roof faster.

I think we worked most efficiently with 3 people: one walked shingles from the back yard to the ladder; the 2nd person laid or threw the shingles onto the roof; the 3rd person, mostly me or Dave, was up on the roof with the nail gun, lining up each shingle and nailing it down.


The photo above shows the east side of the roof looking north. On the north end close to the ridge is the only penetration in the new roof, a white pvc pipe for the waste drain vent. The small 1 car garage is in the background on the right, we focused first on re-roofing the house and haven’t started the garage roof yet. It looks like the weather is going to cooperate this weekend, so Nick and I are starting Friday afternoon and planning to work all weekend. In scale, its only 1/4 the size of the house roof and much less steep; we’re hoping it will be quick and much easier.

At the end of the last post I mentioned what I discovered in the attic. Although the lighting is dim, what this photo shows are 3 individual leaded glass windows in the gable above the front entrance of the house!


No, I’m not kidding. Leaded glass. As in, should make the front of the home more dramatic and beautiful, not to mention provide daylight and natural venting into the attic. These will be uncovered before I am finished with the house, mark my words.

As Nicole Curtis says in the intro of every episode of Rehab Addict, “Why the hell would anyone cover that up?!”

, , , ,

1 Comment

Roofing 101

Hire it done.

When that is not an option, call in your friends and hope the weather holds. And when it doesn’t, buy tarps.

Before I begin writing about this project, I do need to mention how grateful I am for everyone who has pitched in to help this past weekend. It is humbling to have friends eager to pick up a shovel and help me out for a day or two knowing its a messy and tiresome job, yet several did just that. Dave, Jim, Dennis, Kyle, Nick, Chet; my brother and sister have pitched in, and my mom has fed everyone lunch or dinner each day or evening – there is no way I could have taken on this crazy idea of tackling a roof without all of this help.

About two weeks ago, I looked at the extended weather forecast and decided it would be a nice chance to tackle the roof on the humble bungalow. I knew when I purchased it that the roof was in bad shape. In fact, the bank that had foreclosed on the previous owner required me to sign a document making sure I understood the meaning of “as-is,” with almost 3 pages describing that they were not responsible or aware of any issues with the roof. Yeah right. Even my insurance agent felt the same; he actually warned me that the insurance company would probably drop my coverage if the roof wasn’t replaced before winter. So these months as I’ve been working inside, I’ve kept in the back of my head that the roof needed replaced – and tried to budget time and money accordingly.

Well, not just replaced, but torn off, with sagging rafters repaired, and then all new decking before I can even lay shingles. Sounds like light work, no?

P1030148 B

Turns out there were 2 layers of asphalt shingles (well, actually about a layer and a half – so many shingles fly off each time the wind blows, I’m still in shock that I’ve never found a leak during a rainstorm), and then a layer of the original wood shake shingles. Shingle-eater shovels made quick work of the asphalt, while the claw end of a hammer was quick pulling off the shake one row at a time.

Beneath all of those layers, the skip sheathing (also called cedar breather or skip lath) was finally uncovered. Whereas a traditional shingle roof has solid boards or plywood sheathing underneath, wood shake was installed over 1 x 3 boards, each spaced a few inches apart running the length of the roof. The advice I got from contractors was to keep the skip boards in place, as they keep the rafters tied to one another, and to install new sheathing over them.

Unfortunately, in the hustle of making sure everyone had a shovel and no one was falling off (the 6/12 pitch is a little steep and took some getting used to), I forgot to take photos before or during the tear off. The photo above is not my roof, but looks a lot like what we found. (Except above shows a paper layer beneath the shake shingles – mine did not have that.)

From the ground, I could see that both sides of the roof had areas of sagging rafters. The east facing side was barely noticeable, and after shingles torn off was even less noticeable. So we went right to laying new sheathing and then paper over this portion. I should also mention here that I chose not to use traditional felt paper, but a synthetic version over the new roof deck – it’s thinner, lighter, and more like fabric. It’s designed to be more durable during the installation, in case the roof doesn’t get shingles right away. In fact, the product warranty is good even if exposed to rain and sunlight for 6 weeks before the shingles go down. It was about a 1/4 more expensive, but worth the peace of mind in case it rained during the roofing process (IF, ha!)

The west side was where the sagging was the most obvious – as in, my friend the contractor simply said, “whoa.” He was convinced I must have several broken rafters and was baffled to learn they were simply sagging that much. The sagging was in 2 separate areas, and I identified and marked 9 rafters on the north end of the house and 7 on the south that would need fixed to bring the roof deck flat again. I’ll detail that process in a follow-up post, including photos of the old rafters beside the new rafters. During that process, I found the neatest surprise in my attic – it amazes me that people cover up craftsmanship and beauty in the name of aluminum siding.

The roof isn’t finished yet – in fact, I haven’t even started shingling yet. But what was supposed to be an evening spent finishing the sheathing and paper on the west side was quickly rained out. Yes, we draped the exposed part of the roof in tarps and, yes, we got soaking wet.

, , , , , , , ,

1 Comment